New Steampunk Guns

I managed to get a couple of new guns painted last week, both plastic toy guns.
I followed the usual procedure, dismantle if necessary, masking tape used if necessary, everything sanded, embellishments added where wanted. Then a spray coat of acrylic primer followed by a spray coat of matt black acrylic paint.
Then they were both hand painted with acrylic colours and finished with a coat of clear lacquer for protection.

I almost forgot, both of these guns were modified by cutting off the clunky plastic handle which is used for cocking them and replacing them with metal rings which I think look much better.

Steampunk Cyberman Helmet Brass Finish

I like upcycling/modifying these toys. Usually a fairly simple makeover, a few cosmetic additions like rivets and valves followed by a paint job.
This is the starting point

After sanding the whole thing I added rivets a fake zooming eye piece and valve handles on the side tubes.
Next I sprayed it with acrylic primer followed when dry by a spray coat of matt black acrylic paint. I finished it with a light coat of gold paint and a couple of coats of clear lacquer for protection.

This is the finished result.

Available from my Etsy shop here

Steampunk Cyberman Helmet

 I'm a big fan of the Cybermen from Doctor Who, I saw their first incarnation, a long, long time ago. I still like the look of the original design but I do really like the recent updates.
I like to give them a makeover of my own now and again. Preferably with a steampunk influence, so plenty of rivets and either a brass finish or as in this case a copper finish complete with the addition of verdigris.

Available in my Etsy shop. I will soon be Christmas by the way.

https://www.etsy.com/uk/listing/483902853/steampunk-cyberman-helmet-sci-fi-cosplay

Steampunk Kaleidoscopes

I was tidying up the photo albums on the PC yesterday, and realised just how long it's been since I made a steampunk kaleidoscope. These were some of the first things I made with a steampunk influence when I discovered that I was in fact a steampunk.

I was already making kaleidoscopes in stained glass so it was an obvious progression, I try to make them with a Victorian scientific look. I suppose I should make more if I can find the time.

Here's a few examples.

Mal's Gun Steampunk

Having made a couple of replicas of Malcolm Reynolds gun from Firefox recently I thought I'd make another one, only this time with a steampunk feel to it. So I used the basic shape of the Firefly pistol but added two small gas cylinders on each side complete with pipework. As much as I love the octagonal barrel of Mal's gun it's quite time consuming to make and I wanted this one to have a different look so I used 15mm plastic tube with a copper plumbing fitting on the end of the barrel. I also used a plumbers brass nut for the joint between the barrel and the gun body.

The gun was constructed from MDF as usual with hardwood grips. It was finished with acrylic paints all hand painted. I'm very pleased with it

Steampunk Cyberman Helmet

I occasionally up cycle toy Dr Who Cyberman helmets, this is one I finished yesterday. After rubbing the whole thing down with fine grade steel wool and removing some of the inner workings so that they wouldn't get spray painted, I added rivets and nuts.
Next it was sprayed with acrylic primer which was followed by a coat of acrylic matt black paint. The spray painting was finished with a coat of metallic copper paint. Then it was finished by hand by brush painting verdigris on selected areas.

Tarantula Moult for Steampunk

One of my neighbours called round today to get some advice about something they're making, they also bought me a moult from their tarantula, which if you don't know is the skin which has been shed by a tarantula as it grows, like crabs and other creatures do. she gave it to me because she knows the sort of things I make and thought I might be able to make use of it. I'm sure I will.

Steampunk Leather Belt Sam Browne

Having recently decided that I needed a more "steampunk" outfit rather than my usual Victorian clothes and goggles I started putting something together using whatever I had to hand plus a leather jacket I bought on Ebay. I actually Googled "battered leather jacket" surprisingly there were many for sale including some very expensive ones. Needless to say mine was from the lowest end of the price range. I also used the new leather flying helmet my children got for me as part of a recent birthday present. It was a very nice surprise, they knew what I had in mind. They're very thoughtful like that.

This it so far.

I used a wide leather belt I already had but the problem was that the jacket only had two belt loops and my plan to attach various items to the belt (bottles, lamps, pouches etc) meant that when I unfastened the belt everything fell to the sides. While searching Ebay for leather straps to make something myself I came across ex military Sam Browne belts. So I bought one.

We'll have to see how it works out.

Steampunk Revolver Western Cosplay

Just finished this latest steampunk revolver. As much as I like ray guns and ornate fantasy weapons I like a good revolver. Maybe it's my age, when I grew up a lot of the TV shows were westerns. Whatever the reason I like to use them now and again. I like this one because of the length, around 15 inches. It's an upcycled toy made from plastic so it's very lightweight which is helpful if you want to be carrying it around all day.
It's a simple makeover, some small pieces of scroll work added and a couple of small gas cylinders and bright coloured "pipe work".

Available here

Steampunk Cane Walking Stick with Bronze Femur Handle

I finally managed to get around to making some new canes, an assortment of copper light up canes and this one with a hardwood shaft and a cold cast bronze femur or hip bone handle. I've also made this on in two sections which screw together so the shipping cost to other countries will be lower.

Available from my Etsy shop.

Cold cast bronze femur handle steampunk cane

Loki Stuttgart Cane Build

A while ago I got a commission to build  a replica of Loki's cane from the Stuttgart opera scene in Avengers Assemble. Biggest drawback is the shortage of decent pictures on the Internet. Anyway I found a few, but it was always going to have to be more of a pastiche than an exact replica.

I started with an oak  walking stick or cane shaft, standard item, tapered. I stuck a couple of offcuts of polyurethane foam to the top end to give a bit of extra length and to start shaping it to look something like the film prop.

 I had intended to finish this part of the build and then make the top section with the crystal. I got carried away! I shaped the foam like the top of the cane and then covered it with glass fibre and resin for strength.
Not too shabby so far.

After liberal application of filler and a good bit of rubbing down, a quick spray of primer as a guide coat to see what needs work.

I needed to to make the piece which seems to wrap part way round the top end of the cane, I thought maybe I could cut a piece of polystyrene sheet to shape and then use heat to bend it to the shape of the cane. I was wrong! Well it wasn't a complete failure, if the cane top had been a straight cylinder I would have got away with it, but there are some compound curves in there which made it difficult to get it right. Could be done with a vacuum forming machine probably but you'd need the top of the cane to use in the vac former as a form to mould the sheet to.
I went back to basics. Cut the shape from cardboard, tape it to the top of the cane where it's supposed to be then cover the cardboard with glassfibre and resin.
Next I used filler to smooth it out and trimmed off the excess glassfibre.
When the glassfibre moulding of the cover plate had cured , I trimmed it to shape and applied a layer of glassfibre to the inside, set it aside to cure again. Now cured trimmed to size, filled and sanded for a smooth finish, embellishment in polystyrene sheet attached, drilled countersunk and painted.

 Meanwhile I'd been filling,  sanding, priming and painting the cane. Grey primer, coat of flat black and then gold top coat. I'd also been working on the "crystal" I thought I would use a piece of clear acrylic sheet mould to shape to make the fron of the crystal which when fixed in place in the cane would create the space for the LED and battery.
I made a former by shaping a piece of wood and cut a corresponding shape from a piece of MDF. I screwed the acrylic sheet to the MDF, propped it on a couple of blocks, heated it with a hot air gun then pressed the wooden former in to the softened sheet.

And after some fiddling around , a trial run with the LED fitted.
I got hold of a small 12 volt battery and holder which made a nice tidy job of the installation and it's all finished

Steampunk Outfits On The Cheap

We have quite an active steampunk group in our locality, we have fortnightly meetings in local pubs which are well attended. Sometimes we get messages from newcomers on social media saying they’d like to come but don’t have any steampunk clothes.

Well first off, you don't need them to attend a meeting or an event,  certainly not the ones organised by us. We don't expect everyone who's interested to turn up looking like the best dressed steampunk in the world.
Some folk are just curious to find out what we get up to, other’s are really interested but don't have the nerve to wear anything that will draw attention to them. Either way you won't be ridiculed for coming in your everyday clothes.

With the pub meetings not everyone has the time to get dressed up, they may have to come straight from work. As far as events go we're happy to see you show an interest. Some long term attendees wear the minimum of steampunk dress, maybe just a nice waistcoat with a watch and chain, or a suitable hat that they feel comfortable in.

It has to be said that many of the ladies make a supreme effort and they do look fabulous. Though some of the male peacocks among us won't be outdone.

It's surprising how often a couple may become involved in steampunk mainly because one of them is very interested and makes an effort with clothes and accessories while the other is a little reluctant and often stands to one side during group photos. That often doesn't last and it's not long before the reluctant one is telling you how many waistcoats or hats they now own. Not surprising because it's fun. It is nice to be well dressed in good clothes. It's also nice to be repeatedly complimented by members of the public on how splendid you look. Let's face it most people look frightful on a daily basis.

So what should you wear? The short answer is something you feel comfortable in, you can get plenty of inspiration from browsing the internet. It probably won't be long before you find something that inspires you.

The best way to do steampunk clothes on a budget is by visiting Charity/thrift shops. Pound shops/Dollar stores, in fact all discount stores. Wedding outfitters can be a great source for cheap frock coats, waistcoats and top hats. You can probably snag some bargains on Ebay. If you can sew or you know someone who can than second-hand curtains/drapes are a good cheap source of fabric.

This is me on an outing in my very first Steampunk outfit. the velvet frock coat, shirt, cravat and waistcoat all came from a wedding hire company who were selling last seasons stock. I think the total cost was less than £15. The top hat was a vintage bargain from ebay. I've been wearing similar outfits for sometime. I have two frock coats and a tail coat and about four wing collar shirts all from the same wedding company.
It's the accessories that set us apart from the Victorian re-enactors. The brass goggles of course, a good steampunk cane, maybe a ray gun.Many of these can be upcycled toys again often from charity shops.

I recently decided that I wanted an outfit which was more "Steampunk" and not so obviously Victorian in style. I saw a painting which inspired me. I started to make a pattern for a flying helmet but my wonderful children bought me one for my birthday. The leather jacket was another Ebay bargain cost £10. I already had the old pair of cargo pants, my old brown boots and the equestrian gaiters also from Ebay £12. I added an old leather belt which I could use for attaching a small leather bag and a bottle holder, the small lamp was from a charity shop. The gun and cane I made myself.



So you can do it on the cheap, keep an open mind, look at things with a fresh eye. It's not "what is that" it's "what can that be made into".

Steampunk Cravat Pins

Well that was a surprise, someone bought all of the cravat pins I had on sale in the online shop! Not that I'm complaining, it's just unexpected. Never mind though I've managed to find the time to make a few to re stock for the time being. I'll have to get more done soon. If you want to take a look at them click here.

Steampunk Gun Seized by Border Force

On the 23rd of April (2016) I despatched a painted Nerf Rebelle Charmed dauntless Blaster to a customer in Australia I chose "tracked and signed for" for the shipping so I'd know when it got there. It never arrived, Tracking it online only told me that it had got to Heathrow in London then nothing. I contacted Royal Mail who basically just acknowledged that they didn't know what had happened to it. So much for paying extra for tracking.

The customer said they were happy to wait longer as they really liked the gun, fair enough. Royal Mail said I had to wait 25 days to see if it arrived before submitting a claim. As the customer really would rather have the gun than a refund I did my best to paint an exact copy. I posted it on 24th June. By the 21st of July the replacement gun still hadn't turned up! I offered the customer a refund but they said they would wait a while longer Bless them!

On the 31st of July I got an update from the customer, the gun had been seized by Australian Border Force on the grounds of being an "imitation handgun".
The customer submitted a claim for the return of the item on the grounds that the border force description was inaccurate, the claim was upheld, the gun would be delivered.

It finally arrived on the 18th August. (today as I write).

The joys of selling internationally. I've posted lots of guns, scratch built, modified or painted with no problem. I don't think I'll send any more to Australia.

STEAMPUNK NERF REBELLE CHARMED DAUNTLESS BLASTER

My latest painted Nerf gun. It's based on my favourite Nerf Rebelle Charmed Dauntless Blaster. Do you think they were going for the longest name? I love the styling on these, the scroll work and flourishes and the quilted leather effect on the grips is fabulous.
This one is basically silver and blue. It's available now in my Etsy Shop.

Captain Mal's Gun From Firefly

I'm afraid the TV show Firefly seem to pass by unnoticed by me  for some reason, though I do have a copy of "Serenity" on DVD. I recently got the chance to see a replica of Mal's pistol, owned by a fellow steampunk, It was a slightly "steampunk" version with a copper barrel. Anyway having seen it close up as night follows day it was a certainty I'd make one eventually. Turned out to bee sooner rather than later. I get these obsessions.
So with a few photo's gathered from the internet and some measurements plus my usual assortment of materials, MDF, hardwood scraps, bit's of old Biros and clock parts I made my very own Captain Malcolm Reynolds gun.

If you haven't seen Firefly you can get it on Amazon.